Back to Top
 

FEMA LCD Panel Compatibility List

The following table shows which Epson LCD Controllers are compatible with a range of FEMA LCD panels.

 

Product No.SizeResolutionInterfaceEpson LCD Controllers
S1D13513S1D13517S1D13742S1D13748S1D13781S1D13L01S1D13L02S1D13L03S1D13L04
GM240320A-24-TTX2 2.4" 240x320 18-bit OK OK OK OK OK OK OK OK OK
GM240320A-28-TTX2-T 2.8" 240x320 18-bit OK OK OK OK OK OK OK OK OK
GM320240DW-35-TTX2NLW 3.5" 320x240 24-bit OK OK OK (*2) OK OK OK OK OK (*2) OK
GM640480DW-57-TTX2NLW 5.7" 640x480 18-bit OK OK OK OK OK OK OK OK OK
GM800600L-70-TTX2NLW-TP 7" 800x600 18-bit OK OK - - - - - - OK
GM1024768DW-80-TIX2NLW-HL 8" 1024x768 LVDS 18-bit OK (*1) - - - - - - - OK (*1)

 

*1) This panel can be used, but requires an external LVDS-Tx chip (e.g. SN75LVDS84A from Texas Instruments) to implement the panel interface.

*2) The output data width of the LCDC is 18-bit. Bits[7:2] of the RGB panel input should be connected to Bits[5:0] of the RGB LCDC output. Bits[1:0] of the RGB panel input should be connected to GND or Bits[5:4] of the LCDC output.

 

 

The following documents provide recommended register settings for each compatible Epson LCD Controller. Please use these settings as a guide when configuring the LCD Controller for each specific panel.

S1D13513 Panel Settings Rev 1.3
Size: 473 Byte
Download ( xls )
S1D13517 Panel Settings Rev 1.3
Size: 450 Byte
Download ( xls )
S1D13742 Panel Settings (same as S1D13L03) Rev 1.3
Size: 452.5 Byte
Download ( xls )
S1D13748 Panel Settings (same as S1D13L02) Rev 1.3
Size: 459.5 Byte
Download ( xls )
S1D13781 Panel Settings Rev 1.3
Size: 305 Byte
Download ( xls )
S1D13L01 Panel Settings Rev 1.3
Size: 302 Byte
Download ( xls )
S1D13L02 Panel Settings Rev 1.3
Size: 459.5 Byte
Download ( xls )
S1D13L03 Panel Settings Rev 1.3
Size: 452.5 Byte
Download ( xls )
S1D13L04 Panel Settings Rev 1.3
Size: 470 Byte
Download ( xls )